You plug in your iPhone, and it charges. Simple, right? But there's a big difference between a charger that delivers 2,000mA and one that barely pushes 500mA — and Apple's battery icon won't tell you which one you have. Amperes 4 will.
What Does 'Charging Speed' Actually Mean?
Charging speed is measured in milliamps (mA) — the rate at which electrical current flows into your battery. The higher the mA reading, the faster your battery fills up. A typical 5W Apple charger delivers around 1,000mA, while a 20W USB-C charger can push 2,000–3,000mA during fast-charge phases. Amperes 4 reads this from iOS's battery APIs — but starting with iOS 17, Apple significantly restricted how often that data is reported to third-party apps. As a result, a full accurate test now requires up to 30 minutes of continuous measurement to collect enough data points for a reliable result.
Step-by-Step: Running Your First Test with Amperes 4
- 1Open Amperes 4 on your iPhone.
- 2Plug in your charger and cable.
- 3Amperes 4 will display a preliminary mA reading almost immediately — but treat this as a rough estimate only. Due to iOS 17+ restrictions on battery data reporting frequency, this early number is highly inaccurate and should not be used for any comparison or diagnosis.
- 4Tap 'Start Test' to begin a logged session and let the app run. Amperes continuously collects battery readings in the background, building a statistically meaningful result over time.
- 5Wait for the full test to complete — this takes up to 30 minutes. The final result shown when the test finishes is the accurate, reliable number to use.
- 6Save the session to your history with a label (e.g. "20W Apple brick + Apple cable") for future comparison.
Due to changes in iOS 17 and later, Apple heavily restricted how frequently battery current data is made available to third-party apps. Amperes 4 shows a preliminary reading immediately, but it is highly inaccurate. Only the result after a full ~30-minute test is reliable. Run your test when the battery is between 20–60% charged, and let the iPhone sit idle and plugged in for the full test duration for the most accurate result.
Understanding Your Results: What's a Good mA Reading?
Here are typical mA ranges you should expect from different charger setups on a modern iPhone (iPhone 12 or later):
- Old 5W Apple charger (Lightning): 800–1,100mA
- 12W Apple charger: 1,200–1,800mA
- 20W Apple USB-C Power Adapter: 1,800–3,000mA (fast charge)
- MacBook 30W+ charger: 2,000–3,000mA (fast charge)
- Third-party USB-A 1A charger: 500–1,000mA
- Computer USB port: 300–700mA
If your 20W charger is only delivering 900mA, that is a red flag. Either the cable is limiting the output, the charger is counterfeit, or your iPhone is throttling due to heat or high battery level.
Running Baseline Tests for Meaningful Comparisons
The real power of Amperes 4 is comparison. Run the same test — same phone, same battery level, same temperature — with different cables and chargers. Save each session with a label like '20W Apple brick + Apple cable' or '12W Amazon generic + Anker cable.' Over time, you build a personal database of what actually performs.
Using the Online Comparison Feature
Amperes 4 lets you submit your test results to a global database and compare your device's charging performance against other users with the same iPhone model. This tells you whether your low mA reading is normal for your device or genuinely below average.
When to Be Concerned About Low Readings
- Readings below 500mA from a wall charger (not a computer port) suggest a failing cable or counterfeit charger.
- A reading of 0mA means iOS sees the connection but no current is flowing — check the cable ends and Lightning/USB-C port for debris.
- Negative mA readings are normal when the screen is on and power draw exceeds charge input — try testing with the screen off.
- Dramatically lower readings than your previous tests with the same accessories indicate cable degradation or charger failure.
Amperes 4 is the only tool you need to turn "my phone charges slowly" from a vague frustration into a precise, fixable diagnosis.