Battery degradation is not an event — it is a process. Your iPhone battery does not fail on Tuesday. It delivers 2,950mAh today, 2,947mAh tomorrow, and 2,890mAh in six months. By the time Apple Settings shows 90% battery health, months of gradual decline have already occurred. Amperes 4's charging history and charts give you the data to see this trend long before it becomes noticeable in daily use.
Why Long-Term Battery Data Matters
The value of historical charging data is context. A single Amperes 4 reading of 1,800mA from your 20W charger tells you that is what your setup delivers today. But 12 months of readings from the same setup tells you whether that 1,800mA was 2,200mA a year ago. Peak charging current in the constant-current phase (20–80% battery) naturally declines as battery capacity degrades — the cell accepts charge differently as its electrochemical properties change.
Setting Up Your Baseline: The First Test
The most valuable thing you can do with a new iPhone or a newly replaced battery is to establish a performance baseline immediately. Run Amperes 4 with your primary charger and cable when the battery is at 30% charge. Record the peak mA reading and save the session with a label noting the date and setup. This becomes your reference point for all future comparisons.
Also note your current battery health percentage from Settings > Battery > Battery Health & Charging. Write down the date, phone model, battery health %, and peak Amperes 4 mA reading. Repeat this quarterly.
How to Use Amperes 4 History and Charts
Amperes 4 maintains a history of all your saved charging sessions, including the current curve over time. The chart view shows how mA changed throughout each session — from the initial high current phase through the taper at high battery levels. Over multiple sessions, these charts reveal patterns:
- Consistent peak mA in the constant-current phase across sessions from the same setup → battery is holding performance.
- Peak mA gradually declining quarter-over-quarter → battery capacity is degrading.
- Taper starting earlier (at lower battery percentage) → battery reaching its maximum acceptable charge sooner, a sign of reduced capacity.
- Significant current variation between sessions → cable or charger degradation rather than battery (use a new cable for the test to isolate).
Exporting Data for External Analysis
Amperes 4 supports exporting your charging session history, allowing you to track trends in a spreadsheet or note-taking app. For a quarterly review, export all sessions from the period, filter to sessions with the same charger/cable setup, and compare peak mA values. Even a simple chart in Excel or Numbers showing peak mA over time will reveal your battery's trajectory clearly.
Identifying the Point of Replacement
By correlating your Amperes 4 peak mA history with your battery health percentage over time, you can project when your battery will hit the 80% replacement threshold — potentially months in advance. This lets you plan a battery replacement on your schedule (and budget) rather than being forced to act when the phone starts throttling unexpectedly.
What the Data Looks Like After 2 Years
A typical iPhone used actively for 2 years might show: battery health dropping from 100% to 85–87%, peak charging current from a 20W adapter declining from ~2,400mA baseline to ~2,000–2,100mA, and the taper phase beginning 5–8% earlier in the charge cycle. This is normal degradation. A battery showing steeper decline — below 80% in under 18 months with peak mA down 30%+ — suggests above-average stress from heat, charging habits, or heavy use.
Making It a Habit: A Simple Quarterly Check
- 1On the first of every quarter (January, April, July, October), run a standard Amperes 4 test: battery at 30%, same 20W charger, same cable, phone cool and idle.
- 2Record the peak mA reading.
- 3Note the current battery health % from Settings.
- 4Compare to your previous quarter's notes.
- 5If peak mA drops more than 10% quarter-over-quarter, investigate — was there a particularly hot summer? A change in charging habits?
- 6After 4+ quarters of data, you will have a reliable projection of when your battery will need attention.